home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The 640 MEG Shareware Studio 2
/
The 640 Meg Shareware Studio CD-ROM Volume II (Data Express)(1993).ISO
/
door
/
cam_user.zip
/
CAM-USER.DOC
next >
Wrap
Text File
|
1992-10-08
|
21KB
|
410 lines
Cam-Mail v1.0 User Documentation
The purpose of this documentation is to let you, the user of Cam-Mail, get
acquainted with how the door works and how to get the maximum potential out of
the door.
In order to use the Cam-Mail Door you will need some kind of an off-line
reader. I personally suggest that you use the Camster Reader. There are
several off-line readers available and is obviously up to you to choose which
one to use.
You will find that Cam-Mail is the fastest .QWK mail door. Very easy
and simple to use. Both for the user and the Sysop as well.
RoboComm Users
If you use RoboComm to get your mail everyday you won't have any problems
with Cam-Mail working with RoboComm. All you need to do is modify the Mail
Command (In the Prompt Area of RoboComm for each BBS) to: MAIL COMMAND
The DEFAULT for RoboComm is QMAIL COMMAND. All you need to do is remove
the "Q" and everything will run very smoothly if your sysop is using the
default prompts. You can also use the IMPORT feature within RoboComm to load the
CAM-MAIL prompt file.
Commands in Cam-Mail
The Transfer Protocol: One of the most important command functions that you will
need to use will be the (T) Transfer Protocol Area. This is where you will you
select which Protocol you will want to use. The number of protocols that will
be available to you will be up to the Sysop of the BBS(s) that you will be
calling. The Protocol is used to transfer your .QWK and .REP files to and from
the Mail Door. Upon a successful download of your .QWK file your Message
Pointers will be updated. Upon a successful upload of your .REP file your
messages that you have created off-line will be inserted into the appropriate
conferences.
The Select Options: When you go into the Select Options Area the following
options will come up on your screen:
A - Archiver Selected.......... PKZip
B - Scan for New Bulletins..... NO
C - Use COLOR in QWK files......NO
D - Check for Duplicate .REPs.. NO
F - Scan for New Files......... NO
G - Send the GOODBYE File...... NO
M - Update Mail Waiting Flags.. NO
N - Send the NEWS file......... NO
S - Store NDX Files in Qwk......NO
R - Send Replies with QWK...... NO
W - Send the WELCOME file...... NO
1 - Max Messages Per Conference
2 - Total Messages Per QWK Packet
Q - Quit to the Main Area
We will discuss each of these options at this point so you as a user can
better understand what each of these are.
A - The Archiver Selected is the Compression method that you wish to use
as a user. The types of Archivers available to you will be solely
up to the Sysop. Consult with your Sysop if you wish to have a
compression method added.
B - The Scan for New Bulletins will add new Bulletins since your last
time on the BBS that your Sysop has configured for a specific
conference. Note that *ONLY* conferences that you have selected to
be scanned will these New Bulletins be added to your .QWK file.
All PCBoard macros are converted to their proper syntax. This include
the color codes as well.
C - Use COLOR in QWK files allows you to choose whether or not to receive the
WELCOME, GOODBYE, and BULLETINS in color. Your reader must be able to
support ANSI.
D - Check for Duplicate .REPs will scan the CRC DataBase for a duplicate
message using a 32 bit CRC. This will protect yourself from uploading
messages twice into a conference. I highly recommend that you turn
this option on. If your message is not a duplicate, then Cam-Mail will
add your CRC to the message base.
F - Scanning for New Files will add any new Files since your last directory
scan. Only File Directories that your Sysop has told the door to scan
will be checked for new files and conferences that you have selected
for scanning. After a successful download your Last Directory Scan is
updated to the current Date if this option is set to Yes.
G - Send the GOODBYE file is the file that is displayed to you when you log
off the BBS. Some Sysops have this file displayed while others do not.
Toggle this on if you want to see what the Sysop has to say. This file
is inserted into your .QWK packet no matter which conferences you have
selected for downloading. M - Update the Mail Waiting Flags is the option to Update the Mail Waiting
Flag in the USERS file to whom you are sending a message to. This
can be very handy so local users on the BBS that you are calling will
know that they have mail waiting in a specific conference. It also
will notify the Sysop of his/her mail too. I personally prefer that
this option be set to Yes.
N - Send the NEWS file is the file that is displayed when you first log
onto the BBS. This file is inserted into your .QWK packet no matter
which conferences you have selected for scanning.
R - Send Replies with .QWK packet will send any messages that you have
have sent to anybody since your last upload. This option is can be
useful so you can tell if a user has read his/her mail from you or if
you have any replies from him/her as well. If you don't see a reply
that you left to somebody they probably deleted the message and read
it as well.
S - Store NDX files in QWK. Some readers will create the NDX files if they
do not previously exist. If your reader is capable of doing this then
set this to NO. This will save time in downloading your QWK packet. It
you are using the Camster Reader it will create these files for you.
W - Send the WELCOME file will send the Opening Screen no matter which
conferences you have selected for scanning. The Opening Screen usually
contains information about the BBS such as phone numbers for the BBS,
how many files or hard drive space and special ANSI pictures if you have
color turned on when you log onto the BBS.
1 - Maximum Messages Per Conference. This is pretty self explanatory. These
numbers will vary according to your Sysop and your connect speed to the
BBS.
2 - Total Messages Per QWK Packet. This is basically the same idea. These,
too, will vary with the Sysop and the connect speed.
Q - Quit to Main Mail Area takes you back to the main area (That was easy).
Select Conference Area
This is where you the user select which conferences you wish to have
messages scanned using your Last Message Read (LMR). Each conference
has a different LMR. Many BBS's these days have several hundred conferences
to chose from. Cam-Mail gives you several different ways of displaying
conferences. We will now discuss the several different ways to display and
select these conferences:
A - Display All Conferences
D - DeSelect All Conferences
R - Reset Conference Read Pointers (LMR's)
S - Display Selected Conferences
U - Display UnSelected Conferences
A - This will Display a maximum of 76 conferences per screen. It also
displays All the conferences that you have access to read/write messages
in. Simply enter in the conference number that you want to have
scanned for. You can also select a number of conferences of scanning
by using a RANGE or by different numbers.
D - This will DeSelect All conferences that you have selected for scanning.
You need to answer Yes to this question. Once you answer Yes you will
need to reselect conferences for scanning.
R - This will Display the conferences you have selected for scanning and
will allow you to change your LMR pointers without affect the scan
flag.
S - This will Display conferences that you have selected for scanning. This
is a convenient way to see which conferences you have selected. If you
see a conference that you don't want to scan for anymore, simply enter
the conference number and that conference will be DeSelected for
scanning. You can also add conferences for scanning in here as well.
As with the 'A' command, you can select/deselect by a RANGE as well.
U - This will Display conferences that you do NOT have selected for
scanning. You can also select/deselect conferences in here as well.
A RANGE is also allowed in here as well.
Select NetWork Area
This screen provides you, the user, with the choice of NetWork(s) that may
be selected. For your convenience, we have several different NetWorks to choose
from to make things easier. If there is a specific network that you are
interested in, then choose the network of your choice. This area is only
pertinent for users if your Sysop has defined the available NetWorks from which
to select.
1) Local 2) U'NI-Networks
(886 Mins.) Which Network To Use (Enter)=ALL NetWorks?
Now let's put we just learned into practice. First, let's use the (A)
command to Display ALL conferences. Now let's say that we have access to
conference #1 (CamSoft). We want to scan for new messages in this conference.
Simply enter 1 at the "Select by Conference Number(s) (Q=Quit)? " prompt.
Hit the <ENTER> key. You will see a new prompt come up on your screen as
follows:
A) All Mail in Y) Only mail addressed B) Your personal mail and
conference. to you personally. mail TO: "ALL".
Conference: CamSoft NetWork: U'NI-Networks Scan Preference?
The "CamSoft Conference" indicates to you which conference you just selected.
The prompt underneath it is the tricky question. Let me explain your three
options available to you.
A - This is the DEFAULT (Simply hitting the <ENTER> key will default to
this). This tells Cam-Mail to include any kind of message no matter
who it is to. Usually the Main Board is a good conference to use for
this scan flag.
Y - The Your Mail Scan flag will ONLY include messages that are addressed to
YOU only. This can be very handy in certain conferences where there is a
LOT of traffic and you only want to read messages that are to you only.
B - The Both command is not what it sounds like. The Both command will
include messages that are addressed to YOU and will also include
messages that are address to ALL. A very good conference to use this
scan flag would be the ForSale Conference on a BBS or something similar
where traffic is high and you only want to see messages addressed to
everybody and messages for you.
After selecting a conference Scan preference another prompt will come up. This
is your LMR pointer. It will look something like this:
"(1 - 612) [active 612] Last Message Read (Enter)=594? "
The (594) is your current LMR pointer. Simply hit the <ENTER> key if you wish
to leave it as it is. Otherwise enter in a new number.
That is the basic way to select a conference one at a time.
Now let's get into the RANGE way of selecting conferences. There are several
different ways to do this. If you know several conferences in a row that you
want to select for conference scanning you can use a RANGE. You can do this by
doing this:
"Select by Conference Number(s) (Q=Quit)? 1-10;20-50;55;58"
In the above example conference numbers 1 through 10, 20 through 50, 55 and
58 would be selected or deselected depending if you have the scan flag turned
on or off. This is useful if you want to turn certain conferences on while
turning on other conferences for scanning. As soon as you hit <ENTER> the
previous prompts will pop up for each conference that will be scanned. This
is the SLOW way. The next example is a LOT faster.
Now let's say you didn't want to deselect any of the above conferences. You
can use the SELECT command which forces a conference to be turned on. Here's
what it would look like:
"Select by Conference Number(s) (Q=Quit)? SELECT;1-10;20-50;55;58"
This would turn on ALL of the conference numbers for scanning whether or not
they have already been selected previously. It will also use the DEFAULT of
scanning for (A)ll mail and leaving your LMR at it's present state.
Now let's say you want to select the above conferences using the SELECT
command, but wanted to change the last read message point to the last 50
messages in each conference. Here's what an example would look like:
"Select by Conference Number(s) (Q=Quit)? SELECT;1-10;20-50;55;58;HIGH-50"
This would select all of the above conference ranges and set the LMR pointers
to the HIGH Message Number MINUS 50 (Or in other words, the last 50 messages
in each conference).
Now let's say you wanted to do the same thing, but leave the conference
pointers at the high message number. Simply remove the "-50".
Now let's say you wanted to set the LMR pointer to the LOW message number
plus one message number. Here's what an example would look like:
"Select by Conference Number(s) (Q=Quit)? SELECT;1-10;20-50;55;58;LOW+1"
This would take the LOW message number and add ONE to our LMR pointer. If
you wanted to simply leave it at the LOW message number simply remove
the "+1".
The last example is for Deselecting conferences. Instead of using the SELECT
command, simply use the DESELECT command and the conference RANGES you want to
deselect. For the above conference numbers you would do something like this:
"Select by Conference Number(s) (Q=Quit)? DESELECT;1-10;20-50;55;58"
All the conference ranges would be deselected. The HIGH/LOW switches are NOT
used with this command.Download Packet
Once you have all of your conferences ready for scanning you will want
to download your first .QWK packet. Each BBS has a different ID packet which
is the prefix of your .QWK name. On my BBS it is PROEXEC.QWK. This is how
you tell which messages belong to each BBS. In order to download a packet
all you need to do is hit the D <ENTER> and the program will start to scan
conferences for Messages, then Bulletins (If you have that option turned on),
and then Files (Another Option).
As soon as Cam-Mail finishes scanning all of your conferences it will
ask you if you are sure you want to download this packet. The DEFAULT is YES.
You can hit the <ENTER> key at this prompt. If you wish to abort, answer NO
to the prompt.
If you proceed Cam-Mail will then tell you that it's preparing your
packet for final downloading. Once it has prepared your packet it will
notify you to start downloading your packet using the appropriate protocol.
Upon a successful download your LMR pointers are updated. You are now
read to begin using your Off-Line Reader. See the documentation in your
off-line reader on how to use it.
Upload Reply Packet
Once you have used your off-line reader you probably entered in your
first message off-line. The Off-Line Reader creates a separate file for
messages that you have created using your Off-Line Reader. This file is
called your .REP file. For my BBS it would be called PROEXEC.REP. As with
the .QWK packet, it is also in compressed format.
In order to get these messages that you have created off-line you will
need to upload them into the Cam-Mail Door. By using the (U) command this will
enable your messages to be inserted into the appropriate conferences. Please
note that the Sysop can FORCE your .REP file to be checked for duplicate
messages. If you have the Mail Waiting flag option turned on, your messages
will be checked to see if the message to whom it is to is on the BBS. If
he/she is, then his/her mail waiting flags are updated and they will be
notified that they have mail waiting in a specific conference.
Once you have hit the U key, the door will tell you to upload your .REP
file using your Protocol that you defined previously.
Upload Pointer File
If you used the Cam-Mail Door to create your .QWK packet you will find that
a .PTR file exists in there. This contains your LMR pointers for each of the
conferences on the BBS. If for some reason some goes wrong with your LMR
pointers, you can upload this file and it will reset your LMR pointers. You
can then proceed to download the same packet once again. Sometimes we
accidentally delete files. This is where it can come in handy.
Other Features
Some Sysops will FORCE you to Read a specific conference. There's no way
to disable this. Since the Sysop has this conference Forced, you should Read
the messages in the Forced conference. Respect the wishes of your sysop.
The other features in the door are pretty self explanatory. However, there
are some hidden features that are not shown on any of the Menus. And before
I forget there is a HELP file in just about every area. By using the H command
a MENU will pop up asking you which are you want help in. By choosing the
appropriate letter another menu will come up and display to you what this
function does (On-Line Help).
One hidden feature that the door is capable of is command stacking. Command
Stacking allows you the user to place several commands at the prompt by
separating each command with a ';' (Semi-colon). Probably the most useful
command stacking in the door is this:
"D;Y;G"
What this does is tells the door to download your packet, Answers Yes to the
prompt that you want to download it, and to Log Off the BBS when completed.
Very simply, but is very handy. If you are downloading a big packet and don't
want to wait around to log off, use this command. You can also use the DG
command to accomplish the same thing, however, after your download has been
completed. You have 10 seconds to abort the Log Off. These is also a UG command
whcih will give you a 10 second abort after your .REP file.
Another hidden feature is that you can issue the same command via PCBoard.
In order to do this you would do it like this:
"MAIL;D;Y;G"
The MAIL command is the name of the door to open. This might vary on the
BBS that you are calling. If so, substitute MAIL for the name of the Cam-Mail
door.
OFFLINE CONFIGURATION
These options allow you to command the Mail Door via an Offline Mail
Reader. For those users that use RoboComm or the Camster Reader with the
automatic dialing or script function, these options are most helpful. However,
in order for any of these new options to work properly the "TO" field must be
set to either Cam-Mail or QMAIL.
Add - Add conferences for scanning
Bulletins On - This downloads all new bulletins in QWK packet
Bulletins Off - This does not download new bulletins
Color On - This downloads the QWK packet in color, where
available
Color Off - This turns the color off
Drop - Drop a conference for scanning
Duplicates On - Turns on duplicate checking in REP files
Duplicates Off- This has no duplicate checking
Files On - Downloads all new files into QWK packet
Files Off - Does not download new packet
Goodbye On - Sends the Goodbye files with the REP packet
Goodbye Off - Does not send the Goodbye files
Mailflags On - Notifies users they have mail
Mailflags Off - Does not notify users of mail
NDX On - Stores NDX files in QWK packet
NDX Off - Does not store NDX files
Welcome On - Sends the Welcome file with the QWK packet
Welcome Off - Does not send the Welcome file
That's about it for now. If you have any problems with the mail door you
can reach in these networks in the Sysops or Doors Conference:
U'NI-net, ILink, Intelec, and RIME.
If you need to get in touch with me directly for faster response you can
call my BBS at (801)489-3558 [HST 1440].
If you would like Technical Support, please call us at (801)489-4878 during
normal business hours (Monday - Friday 9am to 5pm, Saturday 9am to Noon).